matt.yelland
12-12-2011, 06:52 PM
Evening all,
Just wondering if somebody could shed a bit of light on this, going back i tomorrow to go in depth with the pack and probably change the suction transducer....
My problem
4 HT, 2 LT Scroll Compressor on a pack, ok, get that :D,
but when the pack runs on more than 2 compressors on the HT side, the pack goes into back up mode and alarms on High Suction Pressure. Higher Limit is set to 8barG; suction pressure sits at around 4.1barG;....
Any help would be appreciated</SPAN>... :)
Many thanks
Matt
Just wondering if somebody could shed a bit of light on this, going back i tomorrow to go in depth with the pack and probably change the suction transducer....
My problem
4 HT, 2 LT Scroll Compressor on a pack, ok, get that :D,
but when the pack runs on more than 2 compressors on the HT side, the pack goes into back up mode and alarms on High Suction Pressure. Higher Limit is set to 8barG; suction pressure sits at around 4.1barG;....
Any help would be appreciated</SPAN>... :)
Many thanks
Matt