Panasonic Aquarea's

[Jon Glanfield]

Hi all, does anyone have any experience of Panasonic's heat pumps?

I had a visit from their rep recently and they are claiming 1 of their models the T-Cap has no loss of output down to minus 15.

He wasn't sure how they did this though! They also claim to maintain COP's at circa 2.4 at -15 and 35 degrees flow.

Cheers

Jon

[eiffel]

about the pansonic heat pump,first thing ,you shall be consider the compressor,
because the pansonic compressor just fit the Asian country,which the winter temperature is not very low.
compare to Euroep country.

[angelmarina]

Fact is that T Cap model keep the compressor output down to -15C. This is solved by an additional EEV and sub cooler, sub-cooling principle.
It seems an excellent product.
Post me your email than I send you an internal scheme.

[install monkey]

those claims are based on water temp from 30deg to 35deg out, u need 50deg for underfloor heating so ur immersion elements are gonna be on so ur total energy usage is gonna go through the roof

[MikeHolm]

40C for many underfloors, Install. 35C in a good low energy house.

[install monkey]

immersion elements are the work of the devil-a pain to change as they weld themselves to the cylinder boss and something so small consumes so much leccy! they're evil!!!

[MikeHolm]

Ours are put on with a 4 bolt flange and are easy to take off if needed....ta:p

[Bigfreeze]

those claims are based on water temp from 30deg to 35deg out, u need 50deg for underfloor heating so ur immersion elements are gonna be on so ur total energy usage is gonna go through the roof

Anyone running ufh at 50C is going to need feet like a coal walking monk. No one runs ufh at fifty. Mostly between 25 and 35C depending on the weather. 40C if the installation is crap

[stufus]

Anyone running ufh at 50C is going to need feet like a coal walking monk. No one runs ufh at fifty. Mostly between 25 and 35C depending on the weather. 40C if the installation is crap

HAHA should that not be "coal walking monkey"

Cheers
Stu

[install monkey]

good job u spelt that right!!! haha

HAHA should that not be "coal walking monkey"

Cheers
Stu

[techguy]

Hi Guys.
I'm at panasonic now (go me)
If anyone wants access to Panasonic Aquerea info
join the proclub and download it for urself
www.panasonicproclub.com
click on your country's flag enter your mail and your password and other info and click send'
it will be approved within 24hours and you can download any catalogues you need.
All the capacities /Ratings cop/eer's etc are in the catalogues.

Tech info is available to our customers only

Regards

T

[MikeHolm]

I would like the tech info but the product is not sold in Canada

[install monkey]

dont worry mike im onto it!- lets see if i qualify- as when tech guy finds out its me who kicked off about that comp with the wrong oil in-i mught get a lifetime ban! oops haha

I would like the tech info but the product is not sold in Canada

[MikeHolm]

sshhhh, don't say that out loud haha.

[stufus]

He all ready know Install Monkey I told him. While I was bagging freebies off him.
Cheers
Stu

[install monkey]

could have waited for my correct compressor to land!- is that why he hasnt accepted my freind req??haha

He all ready know Install Monkey I told him. While I was bagging freebies off him.
Cheers
Stu

[stufus]

NO that's because he doesn't like you.HAHA

could have waited for my correct compressor to land!- is that why he hasnt accepted my freind req??haha
Cheers
Stu

[MikeHolm]

You guys suck up as much as is necessary to get the goods....haha

[stufus]

Not in this case Mike ,we're related .
You know what they say "keep it in the family"
Cheers
Stu