Roger Thorpe
18-10-2005, 03:32 PM
I am making a carbon/ammonia adsorption system, and would like to get a packaged condenser, accumulator and evaporator.
The condenser should be water cooled (but could be air) and the evaporator will take heat from a water/glycol loop.
One of the (many) problems is that this will be on the small side for NH3 at 12-15kW.
Does anyone here know of a likely manufacturer, preferably near the west midlands of the UK?
I'm not sure how i'm going to manage the expansion vave either, I'm thinking about using a float valve and a flooded evaporator. Any thoughts?
Thanks
Roger
The condenser should be water cooled (but could be air) and the evaporator will take heat from a water/glycol loop.
One of the (many) problems is that this will be on the small side for NH3 at 12-15kW.
Does anyone here know of a likely manufacturer, preferably near the west midlands of the UK?
I'm not sure how i'm going to manage the expansion vave either, I'm thinking about using a float valve and a flooded evaporator. Any thoughts?
Thanks
Roger