PDA

View Full Version : Trane RTAC run hour reset


socotech
16-10-2011, 02:23 PM
Anybody know how to reset run hours on ch530 after replacing compressor?
chillerman2006
16-10-2011, 02:51 PM
Hi socotech

you can use this software http://www.trane.com/Commercial/DesignAnalysis/TechView.aspx

R's chillerman
CV_Geardrive
17-10-2011, 05:21 AM
Hi Socotech,
You can do this only by replacing the CH530.
You can place a sticker with starts and hours of replaced compressors inside panel.
Regards,
CV
socotech
18-10-2011, 02:02 PM
Ok thanks for the input.