Fujitsu auy 25 rld problem

[makar5553]

Hi!!
I have been writing here before. My air condition was short with gas so i emptied it and add new gas. While i was doing that she reseted and since that it is still in reset and blinking. Now its showing e0:00 and that means that there is a problem from indoor to remote. So i was thinking,its full with gas,the wires are good, maybe the remote should be reseted?! Is there any way i could do that and how?? Or im wrong and you could help me with some good answers.....

Thank you
im writing from croatia,makarska its unbelieveable hot here these days :(
help me soon...

[paul_h]

E0:00 is an electrical fault. either the wiring between the systems, or the indoor PCB or controller itself is faulty.
Nothing to do with refrigerant charge, and at best you can cut power to the unit to reset, but I've never seen the problem fixed that way before, it normally means faulty parts.

[makar5553]

Ok,thanks,i hope that that will help me... And that i wont have any more questions :)
thanks again

[nike123]

You have e-mail message!

[makar5553]

You have e-mail message!

Oprostite al nisan ja vidio nikakvu poruku! Jel mi mozete nesto pomoc u vezi problema ili san ja nesto krivo shvatio?
Hvala

[nike123]

makar5553, I have replayed to your e-mail witch you reported to this forum.
No more, no less.

[paddyaircon]

no pressure test leak fix vacc?
empty and regass ? who do you work for ??

[nike123]

We (members of RE) all are not living in same countries with same legislature and same best practices.
Our environment police (if we have one) have more important job to do than catch peoples who vent refrigerant to the atmosphere. Our salaries are even 10 times lower then yours and our customers don't have money to pay for time and tools necessary to do job as prescribed by law. These are facts of life.
And it looks he is doing it for himself.
Not that I support venting refrigerants.