Climaveneta CVM 3000 Nascosto Keys

[jomi69]

Can someone help with the CVM 3000 Hidden keys for accessing user and Factory Menus. Thank You.

[chillerman2006]

Hi Jomi69

I shall email you the manual

R's CM

[chillerman2006]

Hi Jomi69

manual sent....but please be careful not to adjust anything that does not need to be

the only thing you should need this access for is to calibrate sensors & transducers

R's CM

[teddymac]

Hi Chillerman 2006
I have a manual that tells you details of sensor calibration and so on but it does not give you details of where the hidden keys are and says you should contact climaveneta. I would really appreciate these details if you could email me at tm.edwardmccarthy@gmail.com
Thanks in advance

[chillerman2006]

Hi teddymac

its to the left of the screen, just run your fingers over pushing slightly to find it... you then press the hidden key and ice together

chillerman

[charlie]

Hi Teddymac,

I hope you aren't referring to the procedure identified in the manual as a "Self-Calibration" ......

This will work only connecting a small box called "Self Calibration Kit" to two specific analog inputs of main board.

If you are trying the procedure withouth the "Self Calibration Kit" the final result could be a disaster!

Regards.

[goshen]

Hi teddymac
mail me i will send you the manual with directions .
GOOD LUCK

[teddymac]

Hi Goshen what is your email address ? Mine is tm.edwardmccarthy@gmail.com if you could mail me manual and directions that would be great.
Thanks

[goshen]

Hi
did you get it ?
good luck