View Full Version : A little help guys

31-08-2011, 06:22 PM
ok, im working on a frick screw, rxf compressor model 85. changed out the slide piston assembly . put back together and closed up back plate. then noticed i had a baggy in my parts box from frick, there were two spherical washers in it . now when i took everything out i didnt have or see those two washers. i havnt started comp. yet because i need to know where those washers go if they even go on this assembly. the manual i have on this compressor doesnt show a break down diagram of the assembly. can anyone please help????? a.s.a.p.

01-09-2011, 01:44 AM
Hi nh3newbie,
had similar situation with shaft seal kits, conclusion was the kit covers several series of the same model. Some bits don't apply.

01-09-2011, 06:09 PM
Are they black concave washers? If so, they are a modification Frick made to try to prevent the bolt from breaking on the conical piston.

03-09-2011, 04:54 PM
yea got it figured out guys. n yes they were two black concave washers. got everything put back together and running like a champ... thanx for the input guys really appreciate it...