McQuay chiller

[Soma]

Hi! I have a problem with a McQuay screw chillers. There is an alarm on its screen.This is a service hour problem.How can I delete it?

[chillerman2006]

Carry out the service needed

Then

Check one of your other posts enter service code and reset service
:rolleyes:

[Soma]

Unfortunately I don't know the service code.If I known I wouldn't ask it

[chillerman2006]

Here they are AGAIN then

getting tired of answering and uploading to all your posts asking the same thing!

[Soma]

Thank you for your help,you helped me a lot

[shahbazkhan]

pls write ur chiller model and controller.

[rahamanrahaman]

mc quay als -229,microtech II controller

[install monkey]

this will cost u rep points!!!!
Passwords
Various menu functions are accessible or inaccessible, depending on the access level of the
user, and the password they enter, if any. There are four access levels, including no password,
Level 2, Level 4, and Level 6, with Level 2 having the highest level of access. Without
entering a password, the user has access only to basic status menu items. Entering the Level 6
password (5321) allows access to the Alarm Lists Menu, Quick Menu, and the View/Set Unit
Menus group. Entering the Level 4 password (2526) allows similar access as Level 6 with the
addition of the Commission Unit Menu, Manual Control, and Service Menu groups. Entering
the Level 2 password (6363) allows similar access as Level 4 with the addition of the Unit
Configuration Menu.

[goshen]

Hi
major rep points!!!
sure hope machine survives this acces level
best regards

[Grizzly]

Sorry IM.
Apparently I have to spread points around before I can give more to you for a fine post.
Grizzly

[Noori]

dear somo.
why u dont asked MCQUAY for help.
www.mcquay.com (http://www.mcquay.com)

[goshen]

Hi noori
did you ever try to ask them for help??
good luck