View Full Version : Out of Calibration Torr Gauges.
Grizzly
18-08-2011, 08:43 PM
Is there any reason why Torr Gauges cannot be re calibrated?
I decided to check out my old gauges box and discovered 3, 40 to 0 Torr gauges.
When stripped I discovered the there is no Bordon Tube to damage.
Simply a Brass disc / rack and pinion set-up within sealed cylinder with the glass cover as the lid.
So would it not be possible to have these re-sealed and re-calibrated.
Or is the myth maintained so that new gauges are purchased every time there is an issue?:mad:
Has anyone discovered a gauge company who will recalibrate these?:D
Grizzly.
install monkey
18-08-2011, 08:59 PM
soz mate im on digital. is the calibration req for auditing reasons or for you peace of mind? if so get a new one every 12mths.
Grizzly
18-08-2011, 09:07 PM
Neither really, I just hate the thought of potentially good Analogue gauges going to waste.
After all they are not cheap!
I have several electronic versions. But push come to shove I prefer the old fashioned method.
Thanks for the input.
Grizzly
Brian_UK
18-08-2011, 10:28 PM
You could always try Edwards, they make them and do calibration as well.
UK details...
http://www.edwardsvacuum.com/Contact/EuropeMiddle%20EastAfrica.aspx
Grizzly
18-08-2011, 10:42 PM
thanks Brian.
I will let you know how I get on!
Grizzly
Argus
19-08-2011, 09:40 AM
.
If it's one of those old Edwards high vacuum gauges, they were always very expenesive.
The reason is that they measure exceptionally small values of pressure very accurately when scaled down to a couple of millibar (or Torrr, if you prefer).
These gauges are high precision, calibrated to altitude to avoid atmospheric distortion, then sealed.
If it is repairable, expect to pay a lot.
I have one that's been sitting in my garage for many years.......
I haven't used it since the last big-chiller-dry-outs I did in the early 80's
..........think I might put it on fleabay.....
;) ;) ;) ;) ;) ;);)
.
Brian_UK
19-08-2011, 10:49 PM
Also had email contact from SM Gauges who charge about £40 + carriage per gauge.
Grizzly
19-08-2011, 11:12 PM
That's one of the 2 Bristol companies that I was considering contacting.
Brilliant, thanks for the legwork Brian.
I don't think that's unreasonable as a new Gauge must be well over a 100 quid nowadays.
Brilliant.
Grizzly
james10
20-08-2011, 12:46 AM
Bought a torr gauge recently £180 was the cheapest analogue one I could get
Magoo
20-08-2011, 03:14 AM
Hi Grizzly.
Go digital, and drop into the current world. And easily calibrate by Tech- rentals
As an aside, I used to know a lady from Bristol and she had a lovely set of Bristol Cities [ sorry ] firm and pointy bitz.
frank
20-08-2011, 08:43 PM
Hi Grizzly.
I used to know a lady from Bristol and she had a lovely set of Bristol Cities [ sorry ] firm and pointy bitz.
DISGUSTING...........got any photo's? :D
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.