View Full Version : Sabroe NH3 Skid Intro
chillerman2006
11-08-2011, 11:44 PM
http://www.youtube.com/watch?v=V5C03cpbDPg
http://www.youtube.com/watch?v=xsvIPMFkFBc
Grizzly
12-08-2011, 12:20 AM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly
chillerman2006
12-08-2011, 12:29 AM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly
Now you got me mate,
:confused:
The cross over from chillers to this was a big step for me
I am still on the bottom rung when it comes to this sort of kit, but good experience
Sandro Baptista
12-08-2011, 10:22 AM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly
Probably it's a SAB163 with standard rotatune 6000 rpm. SAB202 doesn't allow rotatune 6.000 rpm but in fact could be equipped with an inverter rotatune (3.000 or 3.600 rpm).
HVACRsaurus
13-08-2011, 12:00 AM
Good video.
polarpodge
13-08-2011, 02:49 PM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly
sounds and looks like a 163 rotatune hr machine
Josip
14-08-2011, 11:26 PM
Hi, :)
It is 163 Mk4, it has a separate oil vessel,
but not Rotatune ... motor is connected to female screw if I see it well...
main motor for rotatune can be connected to male rotor, only
also R types are without cylinder for capacity control ....
Best regards, Josip :)
well, Josip you have all reason
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.