PDA

View Full Version : Sabroe NH3 Skid Intro







chillerman2006
11-08-2011, 11:44 PM
http://www.youtube.com/watch?v=V5C03cpbDPg

http://www.youtube.com/watch?v=xsvIPMFkFBc

Grizzly
12-08-2011, 12:20 AM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly

chillerman2006
12-08-2011, 12:29 AM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly

Now you got me mate,

:confused:

The cross over from chillers to this was a big step for me

I am still on the bottom rung when it comes to this sort of kit, but good experience

Sandro Baptista
12-08-2011, 10:22 AM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly

Probably it's a SAB163 with standard rotatune 6000 rpm. SAB202 doesn't allow rotatune 6.000 rpm but in fact could be equipped with an inverter rotatune (3.000 or 3.600 rpm).

HVACRsaurus
13-08-2011, 12:00 AM
Good video.

polarpodge
13-08-2011, 02:49 PM
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly

sounds and looks like a 163 rotatune hr machine

Josip
14-08-2011, 11:26 PM
Hi, :)

It is 163 Mk4, it has a separate oil vessel,

but not Rotatune ... motor is connected to female screw if I see it well...

main motor for rotatune can be connected to male rotor, only

also R types are without cylinder for capacity control ....

Best regards, Josip :)

ping
14-08-2011, 11:42 PM
well, Josip you have all reason