View Full Version : Denco CCU Controller codes
Nemisis
03-08-2011, 09:36 PM
Hi, I have a L&P test on an old Denco Close Control Unit possibly for next week. I usually work on Airedales, so have no idea what the access codes on the Denco controllers are.
I Havent been told the exact model, but was wondering if any people out there know these codes?
Bit knackered (been a long day), and no luck with any of my searches so any help is welcome! :eek:
martinw58
03-08-2011, 10:37 PM
denco codes
Level 1.
¯¯¯¯®
Level 2.
¯¯¯¯®
Level 3.
¯¯¯¯¯®
Factory Settings. (access via Level 3)
®
Grizzly
04-08-2011, 05:59 AM
Hi Nemisis.
L&P Test?
Would that be a Leak and Pressure Test?
Or do you mean just a Leak test?
I believe Martin has suplied you with the codes for the Millenium Controller.
The newer ones appear to be a closely guarded secret.
Grizzly
Denco Technical
04-08-2011, 12:57 PM
attached are the correct passwords.
Nemisis
04-08-2011, 11:22 PM
yeah mate (Grizzly) is a leak pressure test on an ancient denco unit (or so I have been told) and i sure as hell aint looking forward to it! prefer my nice shiney reliable Airedales anyday :)
Thanks Martin and Denco Tech :) was dreading the controller :)
Denco Technical
22-08-2011, 03:33 PM
I prefer shiny new denco units .....
chillerman2006
08-09-2011, 01:20 AM
Off topic - needed removing
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.