scottmcgurk
27-07-2011, 09:10 PM
Hi all,
Im working with 3 units and fitting an LG PQDSB to each indoor coil to switch a booster fan. (The indoor units are MB09AHL's)
Connected to the CN-CC port on the main board, as per the manual - but no life from the board.
I could believe a faulty board, but not 3, and not on every unit!
Is there something I've to do on the controller to enable these boards?
Cheers
Scott
Im working with 3 units and fitting an LG PQDSB to each indoor coil to switch a booster fan. (The indoor units are MB09AHL's)
Connected to the CN-CC port on the main board, as per the manual - but no life from the board.
I could believe a faulty board, but not 3, and not on every unit!
Is there something I've to do on the controller to enable these boards?
Cheers
Scott