ConDor
27-07-2011, 06:28 PM
Hi, I have a mitsubishi SRK 25GZ-L1. As I would change to an air to water heat pump. I already have plate heat exchanger, water pump and all. It is an experimental project. As you can see it is an air-to-air model. I've got everything under control except, fan motor in the indoor unit. I would like to disconect it but it Keep Going on fault. Is there a way I can cheat the PCB so it thinks the fan is running even though it is not connected. Any ideas? Would be really grateful for a solution. Thanks.
www.mhi-russia.ru/files/673.aspx (http://www.mhi-russia.ru/files/673.aspx) PAGE 13
www.mhi-russia.ru/files/673.aspx (http://www.mhi-russia.ru/files/673.aspx) PAGE 13