d00b
03-07-2011, 09:59 AM
Dear Sir,
I have Fujitsu General split system ASHA12LGC.
LED indicators shows serial reverse signal error at operation start up
Indoor unit works correctly
Terminals outdoor unit and indoor unit are connected correctly.
I switch on split system and check voltage in the outdoor unit
Voltage in the plug socket is 203 - 213 V.
Voltage between "earth" terminal and "L" is 28 V
"earth" terminal and "N" is 28 V
"earth" terminal and "3" is 28 V
Voltage between "N" terminal and "L" is 0 V
"N" terminal and "3" is 0 V
"L" terminal and "3" is 0 V
Please, send me repair manual for that model of split system
or give any idea to solve this problem
I have Fujitsu General split system ASHA12LGC.
LED indicators shows serial reverse signal error at operation start up
Indoor unit works correctly
Terminals outdoor unit and indoor unit are connected correctly.
I switch on split system and check voltage in the outdoor unit
Voltage in the plug socket is 203 - 213 V.
Voltage between "earth" terminal and "L" is 28 V
"earth" terminal and "N" is 28 V
"earth" terminal and "3" is 28 V
Voltage between "N" terminal and "L" is 0 V
"N" terminal and "3" is 0 V
"L" terminal and "3" is 0 V
Please, send me repair manual for that model of split system
or give any idea to solve this problem