PDA

View Full Version : Petrol Stations



r.bartlett
09-06-2011, 01:07 AM
Do air con & fridge guy's need special training certification etc etc to work in/on petrol stations in the UK?

Grizzly
09-06-2011, 06:17 AM
I know of 1 company whose guys have 17th Edition as well as the normal fridge tickets.
Grizzly

taz24
09-06-2011, 09:59 AM
Do air con & fridge guy's need special training certification etc etc to work in/on petrol stations in the UK?

You need to do a forecourt training course.
It takes about 1/2 a day and needs doing every 5 years.

It is basic stuff, genral health and safety and then special
attention to brazing and hot works for obvious reasons.

taz

.

taz24
09-06-2011, 10:03 AM
Do air con & fridge guy's need special training certification etc etc to work in/on petrol stations in the UK?

Found this.

Just one of many, many companies offering the training.

Oh and it takes 2 days not a 1/2 like I thought (the 1/2 day one must be a refresher).
http://www.smtsgroup.com/site/courses.cfm?course_id=1&pagenumber=1&type=all&gclid=CO2GrPy6qKkCFUEb4QodIUnLLg

COURSE CONTENT


Core Day

Setting the Scene - Accidents
Organising for safety - including responsibilities, duties, and risk assessment, consultation, & enforcement officers
Workplace safety - including general workplace safety requirements, behavioural safety, fire safety, working at height, hidden services, asbestos, confined spaces, and display screen equipment
Tools, Plant & Machinery - including hand held tools, electricity, and power tools
Health - including hygiene, hazardous substances, effects of the sun, temperature, occupational diseases, manual handling, vibration, noise and stress
Procedures - including safe systems of work, first aid requirements, and occupational road accidents
The environment - including pollution & waste, employers and employees responsibilities
Petrol Retail Day

Hazards on a Petrol Filling Station - including hazardous zones
Working safely on a Petrol Forecourt - work control procedures, task classification and required documentation
Safe work practices + case studies
Case studies

r.bartlett
09-06-2011, 10:07 AM
Thanks very much chaps. I had concerns re the 17th ed but the half day isn't too bad and maybe worth doing

paul_h
09-06-2011, 04:11 PM
Don't braze or weld on site.
Course ends...

Mark
09-06-2011, 06:29 PM
Do air con & fridge guy's need special training certification etc etc to work in/on petrol stations in the UK?

Hi Richard,

As Taz said the safetypassport is the way to go.

www.safetypassports.co.uk

Mark

taz24
10-06-2011, 10:24 AM
Don't braze or weld on site.
Course ends...

Put your ciggarette out first.. :)


taz

.

taffy-boy
01-11-2011, 10:33 AM
how do you light your lamp without a cigarette

cadwaladr
02-11-2011, 07:01 PM
with the sparks off the angle grinder shimple!

install monkey
02-11-2011, 07:21 PM
rb its well worth doing petrol stations-for the big petrol stations, be careful of the franchise ones-u can normally tell them as there is prayer mats in the toilets and half the pumps dont work.
the course will pay for itself when u pull some of the fridges out,all them pound coins! its worth getting kicked whilst changing 10 watt multifit fans

mikeref
02-11-2011, 10:28 PM
Spend more time doing the paperwork at these places than doing the job.