View Full Version : alarm code enquiry
viking13
24-05-2011, 07:45 PM
I have a mitsubishi cpe53-3b reefer system that runs for five minutes then stops on alarm code 202,then restarts after a minute or two.Any suggestions to what may be causing this?
phil Landon
26-05-2011, 10:24 PM
hi there Viking, the alarm code refers to a low pressure fault, check you refrigerant level and also see if the drier is blocked. may even be something as stupid as the pressure switch/transducer failing, also check the connections to the main terminal panel for moisture or corrosion
hope this helps
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.