View Full Version : TK uP-VI (SB200 or 300): Wiring Diagram or Manual w/diagram for
nagy178
18-05-2011, 04:15 PM
Hey Guys,
I am looking for the wiring diagram for the TK uP-VI controller. Particularly the "A" and "B" connectors. I am trying to trace out the "CTMP" connection. Any help with this would be greatly appreciated.
Thanks in advance!
tony2009
19-05-2011, 07:13 AM
What's your email address so I can send the wiring diagrams over.....Tony
tony2009
19-05-2011, 07:16 AM
Would you prefer the manual? The manual is about 35mb so I'll have to arrange a link for you to download it.
You can contact directly if you want: tony@iceman.com.au
nagy178
19-05-2011, 01:47 PM
I sent you an email from nagy178@bellsouth.net
Thanks for your help.
tony2009
20-05-2011, 12:17 AM
G'day Nagy178;
I have emailed you the links which will allow you to download them to your computer. I have covered uP-IV, uP-V & uP-VI
Let me know if you have any problems in downloading them and I'll find another way to get them to you.
Tone....
nagy178
20-05-2011, 02:39 PM
Tony,
I did not receive an email with the links. I received a couple emails where you said you were uploading, but none with the actual link.
tony2009
23-05-2011, 05:32 AM
G'day Mike;
Not sure what happened there.
I was uploading the files, then I sent a second email to say they were uploaded, and the should have been another email with the links on it; no worries, more than one way to get around this problem.
Check your email again; this should work. Email me direct if there any problems, fingers crossed there shouldn't be.
Tony
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.