MikeHolm
09-05-2011, 02:33 AM
I don't know if this is the right heading for this subject but here goes...Does anyone have a good idea how I should build a test chamber for ASHPS? It will have to go down to -25C or maybe lower (with a 25C ambient) and be able to keep up with a 30kw system trying to remove what little heat there is left in the air at that temp. Next door to it will be a controlled room which could be set to typical household ambient conditions, 5-22C for example. It obviously won't be running 24/7 but I would like it to be as efficient as possible.
Any thoughts, which refrigerants or comps to use.
Thanks
Any thoughts, which refrigerants or comps to use.
Thanks