PDA

View Full Version : "Danvalve" Isolating Valves.


Grizzly
03-05-2011, 08:16 PM
Hi Guys.
Can anyone help as where I might find some info on the above.
I have discovered that Johnson Controls sold off the Dan-valves Business to Danfoss a few years back.
Only I have a small Dan-valve on an Ammonia plant in desperate need of a re-build or replacement.
Dependant upon what options I have.
Does anyone know who if anyone deals with these?
I have trolled through pages of Goggle hits only to end up confused.
Thanks Grizzly
Josip
03-05-2011, 08:44 PM
Hi, Grizzly :)


Hi Guys.
Can anyone help as where I might find some info on the above.
I have discovered that Johnson Controls sold off the Dan-valves Business to Danfoss a few years back.
Only I have a small Dan-valve on an Ammonia plant in desperate need of a re-build or replacement.
Dependant upon what options I have.
Does anyone know who if anyone deals with these?
I have trolled through pages of Goggle hits only to end up confused.
Thanks Grizzly

Maybe you can try here...

http://www.danfoss.com/BusinessAreas/RefrigerationAndAirConditioning/Products/Group/RA/Stop-and-Regulating-Valves/7c3664aa-1ac0-43ee-98d2-421dcceb6f33.html

find and specify your valve and then click on contact ....

not sure if this is of some help

Best regards, Josip :)
Grizzly
03-05-2011, 08:52 PM
Not so sure those are the correct Valves. I will check it out tomorrow as the details are back at the office.
But all the same many thanks for the rapid response my friend.

I did look on the same page but never thought to actually try and contact Danfoss.
Ever since they sold off Dean and Wood in the U.K. It has become very difficult to obtain the more unusual info.

Has anyone else dealt with Danvalves in the not to distant past?
Many Thanks Grizzly.
Magoo
04-05-2011, 03:03 AM
Hi Grizzly,
do you have the Cat 2000 industrial manual, or the collection of instructions manual?. They both have all the Danvalve info in them. Alternatively go to Danfoss web site and scatch around and down load hopefully.
magoo
Grizzly
04-05-2011, 06:37 AM
Magoo.
Thanks for the input.
I do indeed have the collective set of instructions (last 2 print versions).
So I will investigate further today.
Grizzly
Grizzly
04-05-2011, 08:21 PM
Yep Dan valves still exist and Magoo, Josip and Josef.
You were all correct the answers are all there provided you know where to look.
IE. Danfoss Collective set of Instructions or website.
The style valve that I have is now obsolete so I have gone for a newer version which will have to be welded in place.
Thanks once again and hopefully someone else may benefit?
Grizzly