PDA

View Full Version : Older LAE Controller



Abe
28-09-2005, 10:32 AM
I need to re program settings on a LAE controller fitted to a freezer room.

It has a fan delay function

Would anyone have the parameters and also which buttons I need to activate programming mode!!!

maff
28-09-2005, 11:19 AM
Hi Aiyub,
This is my first post, so I hope it helps. Try going to www.hawco-refrigeration.co.uk in their technical support section they have pdf files for many LAE controllers. Hopefully they will have one for your model of controller as the parameters tend to differ from each model.

Brian_UK
28-09-2005, 07:31 PM
Hi and welcome Maff, I was going to suggest Thermofrost but your choice is better.

frank
28-09-2005, 09:18 PM
http://www.lae-electronic.com/

Abe
01-10-2005, 07:02 PM
Thanks all for your help
It was an older LAE MCDU11 Controller and I couldnt get any details on this particular model

rbartlett
01-10-2005, 07:28 PM
this is screaming at me that I have the set up book for this controller..I've just searched my file here and ca't find it -but I will still look some more..maybe not tonight but I will

cheers

richard

rbartlett
01-10-2005, 07:30 PM
i bloody well knew it..

send me a fax number and I will send you the full set up instructions

cheers

richard

Abe
01-10-2005, 07:38 PM
Thanks richard

Fax Number 0116 210 .....

:)

Abe
01-10-2005, 07:56 PM
Got it Rich.............

My troubles are now over!!!
I "owe" you one

rbartlett
01-10-2005, 08:02 PM
Got it Rich.............

My troubles are now over!!!


if only life was that simple.....

cheers

richard

phil
01-10-2005, 08:10 PM
hi all

could not remember where i had seen this controller it was on the really older fosters cabinets

dug out the details but if you are ok if not i have the fosters version of the control

barnsie
17-10-2005, 10:13 AM
technical back up for all lae controllers phone hawco refrigeration 01483869000

Craig Schilder
25-05-2009, 08:40 AM
Hi everyone

I stumbled on this site so I hope someone can help. I have a Friulair air dryer with a LAE controller, Model DMC20RI. If anyone has info on this controller, e.g. setup proceedures, parrameters etc. i would really appretiate it. I have tried the LAE site but this controller seems to have been discontinued.

Brian_UK
25-05-2009, 11:21 PM
Hi Craig, welcome to the forum.

The following file contains programming details for your controller, amongst others.

Please note that the password is at the end of the document.

http://www.belairtech.net/manuals/discontinued/BelAir%20PLS%20Manual.pdf

123-steve909
30-05-2009, 10:53 AM
technical back up for all lae controllers phone hawco refrigeration 01483869000

hello simon!

chanchrea
15-03-2011, 09:24 PM
i bloody well knew it..

send me a fax number and I will send you the full set up instructions

cheers

richard

Hi rechard
I have changed Lae controller AD2-5C24W-AG to the old generation model that have recommended by HAWCO Refrigeration but not it work. I don't know how to program the parameter.

I do hope you may help with this horrible thing.

Please give me ring 07940873479 I will give you fax number at work. I can't give you right now because I can't remember.

Kinds regarding

Chan

barnsie
17-03-2011, 10:49 AM
it do work !
In fact it works beautifully! Again if you bought it from hawco surely it would be a sensible idea to ring hawco technical help on 01483869069 of if you feeling really daring go to the technical help section of the hawco website (http://www.hawco.co.uk) where surprisingly you can download all the lae Eliwell and Carel instructions! Or buy pre programmed controllers then you don’t have to do anything !!