srryan1
30-04-2011, 02:02 PM
i have installed a 14000 btu mr. slim mini-split i have pulled a vacuum on the lines and evap core and have it wired 220v. but is not powering on.
there are not lights on at all. iv held the power switch down and pressed it several times but nothing is happening.
the low side is sitting @ 120 psi so i know it has enough *****.
i havent checked the voltage yet i have to get a meter leaving to get one right now.
there are not lights on at all. iv held the power switch down and pressed it several times but nothing is happening.
the low side is sitting @ 120 psi so i know it has enough *****.
i havent checked the voltage yet i have to get a meter leaving to get one right now.