View Full Version : Defrost termination switch
jakb21599
22-04-2011, 10:02 PM
Where is the best place to attach the defrost termination switch on the evaporator ? And how does this switch work ? Once in defrost, when the coil heats up to a certain temperature it cuts the defrost cycle short if not needed ? could you explain ? Thanks
Brian_UK
22-04-2011, 10:14 PM
The best place is the last place on the coil that will be defrosted.
http://www.hvacfun.com/a-troubleshooting-frozen-refrig-evap-coil.htm
jakb21599
23-04-2011, 01:37 AM
Thanks for the info Brian.
The best place is the last place on the coil that will be defrosted.
http://www.hvacfun.com/a-troubleshooting-frozen-refrig-evap-coil.htm
coolhibby1875
23-04-2011, 12:13 PM
it all depends on many factors, if the coil has has heaters front and back then the klixon should be strapped to the middle of the coil, like how they do on arneg cases, you really are better speaking to the case supplier, cause if you misplace it you will be back defrosting it reguarly
pie man
16-06-2011, 10:15 PM
Spot info has improved my understanding how the DTS works! Love this site!
pie man
16-06-2011, 10:16 PM
Meant to say SPOT ON! Ha
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.