View Full Version : Equipment & Installation specifications
Kevin Yeo
25-09-2005, 10:05 AM
Dear all,
Do you guys have any paper for installation & equipment guidelines and standards. For instance, how piping works should be carried out, U trap for oil return, something like tat...
chemi-cool
25-09-2005, 03:32 PM
Hi Kevin,
The pipe layout is usually designed at the place of work.
All the copper parts can be found in the manufacturer catalogue.
Or you can make your own if you have the tools.
Chemi:)
bangoman
12-01-2006, 04:43 PM
Good question buddy! also need a website for manufactuer catalogue with info on pipe runs especially supermarket refrigeration installations
cruzeiros
12-01-2006, 06:11 PM
http://www.climaticcontrol.com/info/jjzgate/Infotec/Info-Tecs11-20/Infotec_12(rev1).htm
here is something about oil return..i hope it's useful
i also have a Linde instructions manual somewhere.. about supermarket refrigeration and i think it's what you are looking for. i hope one of these days i'll get to put them on my computer and i'll be glad to send it to anyone interested
SteveDixey
14-01-2006, 10:36 AM
http://www.climaticcontrol.com/info/jjzgate/Infotec/Info-Tecs11-20/Infotec_12(rev1).htm
Good stuff. Looked at other information on that site for steam as well as refrigeration and it is clear and easy to use. (Just need to convert it to metric now....)
Is there any mileage in creating a link in the Databse for this?
Steve
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.