PDA

View Full Version : Funny tube on the evap



d9022
14-04-2011, 03:13 PM
I've been given a disfunctional Kide walk in (but thats another story)
I took the panels off the evap to clean out years of crud and noticed a
coiled tube like a Cap tube solderd between the flow and return just
before they enter the evap, any thoughts as to it's purpose.6568

Tayters
14-04-2011, 07:45 PM
In the expansion device corner, with a length of 9' and an internal diameter of .054" .......The Capillary Tube.
In the defrost corner with a interval of 4 times each 24 hours and termination temperature of 12*C is........ Hot Gas.

Cap tube goes up the suction pipe for a cheeky bit of subcooling. Top pipe goes to hot gas defrost solenoid.

LET'S GET READY TO RUMBLE!!

Andy, AKA Papa T - Undisputed Paperweight Champion.