PDA

View Full Version : Refrigerant recovery machines



Mark
23-09-2005, 05:11 PM
Hi all

Contemplating which refrigerant reclaim machine to invest in .
I need a unit capable of liquid recovery with a large capacity to mininmize downtime ,ideally 110v.

Thanks in advance:)

Kind regards. Mark

Brian_UK
23-09-2005, 11:12 PM
Bear in mind Mark that most machine can do liquid on a push/pull basis or are you after something that will pump the liquid itself?

chemi-cool
24-09-2005, 08:18 AM
Hi Mark,
There are many on the market,
Ican only add that oilless compressor is the trend now.
Take a look at this one.
http://www.bacharach-inc.com/stinger.htm


Chemi:)

Mark
24-09-2005, 09:06 AM
Bear in mind Mark that most machine can do liquid on a push/pull basis or are you after something that will pump the liquid itself?

indeed yes,we have many units capable of liquid/vapour recovery.;)

I was after something on the larger side to speed up recovery,ive looked at the cps range which is a possibility.

hiitsme
25-09-2005, 04:00 PM
Hi Mark,

we use two cps-s. a smaller one (maybe cr500) and a new cr700 (both of them is E, I think it means 230V)
The smaller is pretty rectangular, like REFCO. The bigger is that "oval" one.
Both of them is Ok for push/pull and the bigger is enough for us with liquid. The problem starts when you want to recover gas from a system...
Anyway what dou you mean by "large"???
We use the for systems up to 440 kg of 134a. e.g. from a bigger chiller with the smaller recov.machine you can push/pull approx. 60-62kg/45-55min. (1/4 hose and the machine IS a used one)
The new one should be better but it's broken down after 3 months...