PDA

View Full Version : Cold Room Panels



Abe
19-09-2005, 10:48 PM
I have been using the German Celltherm panels for a while now
But I know there expensive

Looking for something good, easy to put together........ie must have cam locks.........and be polyurethane foam

but..........something competitive

Anyone got any sources?

Thx

US Iceman
20-09-2005, 01:38 AM
Hi Aiyub,

I'm not sure if this information is useful to you, but I thought I would go ahead and post it for your review.

Some quick locations to see if this meets your requirements.

I cannot comment on the quality of these, but I'm sure you or one of our associates on the forum should be able to determine if any of these are acceptable.

http://www.buildingdesign.co.uk/facil-group5/ursa-uk/insulated-panels-Ursa_UK.htm

http://www.frimatec-isocab.com/

http://www.thermal-composites.co.uk/

http://www.isowall.com/

http://www.stancold.co.uk/news/050217-kingspan.htm

http://www.etcdirectory.com/White-Pages-Environmental-Test-Chambers.html

Hope this helps.

Regards,
US Iceman

Mahmoud
20-09-2005, 11:07 AM
Hello ayoub..

what is the thickness that u r looking for, and what is the density also that you are looking for,, pre-painted or plastisol panels,, also what is the rate per square meter that u r getting.. and what is the quantity and location u want to ship to to see if this is feasible..

regards..

Abe
20-09-2005, 06:16 PM
Hello Mahmoud

For chillers, normally 70 mm , for Freezer a bit more..........80 mm or more

Im not looking very big rooms......

I was actually looking to see what our UK guys were using.........:) :) :)

But Im getting..............International Feedback!!!!!!!!!!!!!
:D :D :D :D :D

But fair goes............Thanks for all the help Im getting!!

rbartlett
20-09-2005, 07:47 PM
A

i thought you'd asked this before...?

anyway

coldsec
polysec
isd

there are hundreds of 'em out there

xheers

richard

Abe
20-09-2005, 11:47 PM
Sorry

Im not sure why I really asked.........I feel like a duff now!!

I guess Im just too damn lazy to get my RAC Directory out and start ringing around!!!

But I think Ive got the job I quoted for using Celltherm panels.........so on this occasion Ill go with them.......

Mahmoud
21-09-2005, 05:28 PM
hello Ayoub,,

it's ok man,, anyway to give an indication the square meter of 100mm polyurethane including accessoris (prepainted is 33 USD FOB-Dubai Ports)

go puplic man .. :)

Grizzly
30-10-2008, 04:11 PM
[quote=jeycon;124350];)


jeycon's naughty bit of advertising was removed when Argus the Mod woke from his slumbers - in fact I've been down in Wales all day


James
You are obviously keen to advertise your Ware's!
No problem as long as you are like the rest of our sales guys.
1) offer professional advise where necessary (without bias)
2) Pay for the privilege of advertising on this free
advise forum.
( like the rest)
3) I hope your sales response when actually required
is a bit faster than your responses the the 2 posts you have so far replied to!
As Abe posted them back in 2005!
Grizzly

nh3wizard
30-10-2008, 04:25 PM
James
You are obviously keen to advertise your Ware's!
No problem as long as you are like the rest of our sales guys.
1) offer professional advise where necessary (without bias)
2) Pay for the privilege of advertising on this free
advise forum.
( like the rest)
3) I hope your sales response when actually required
is a bit faster than your responses the the 2 posts you have so far replied to!
As Abe posted them back in 2005!
Grizzly

I was hoping a mod would catch this but it didnt happen... Thanks Grizzly


Gimme a break! - Argus the sleeping Mod

Brian_UK
30-10-2008, 06:55 PM
I was hoping a mod would catch this but it didnt happen... Thanks Grizzly
It's been noted, it all depends when we log on :D

Grizzly
31-10-2008, 12:03 AM
Argus & Brian.
No criticism intended. In fact I never even flagged this 1 up!
You guys cant be on patrol 24/7.
Besides it gives the likes of nh3wizard and myself the chance to have a bitch!
Why should you have all the fun.
Just as long as I haven't "rocked the boat" by criticising this guys post, in the first place?
Grizzly

Brian_UK
31-10-2008, 12:53 AM
No offence taken at all Grizzly.

I know that if you had been seriously ticked then you would have hit the red triangle as you have done in the past.

Ooops, just looked up the thread, see Argus has been around ;) (That'll teach me to hit the 'go to last post butto') :)

Abe
31-10-2008, 10:50 AM
Hello Guys

Glad my post from 2005 still alive and kicking.
And naughty, naughty..........that company trying to capitalise on some free advertising.

If youre that good, then plaster a proper ad up on this forum.

Thx to Grizz and HH£ for some handy detective work
Thx to Brian, Argus, for stealing a march and deleting that creepy message.

:cool: