View Full Version : city multi with g 50
martinw58
10-03-2011, 08:04 PM
i have a mitsi city multi with a g50 controler set the units up on the time clock with a set temp of 23 when the units switch on 2 of the units start with a set point of 19 the others start at 23 any idears
install monkey
10-03-2011, 08:56 PM
check the timer schedule for each unit and omit the set temp otherwise it will start up at 19 each day
stufus
10-03-2011, 10:07 PM
Check which schedule pattern is selected and check if the set temp is locked at 19
Cheers
Stu
JoeAT50A
11-03-2011, 04:00 AM
stufus is right, check your patterns P1 to P3 and also P4 (Prohibit scheduler).
6468
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.