View Full Version : trane PCV chiller
timothy
06-02-2011, 07:34 PM
I am pulling the motor on a pcv2f very soon.
I am looking for lifting specialty tools for the
valute etc.....I have never done a pcv.This
machine was built in `67 or 68
thanks
monkey spanners
06-02-2011, 07:54 PM
Hi Timothy,
I haven't a clue sorry :confused:
Is that a 260 ton chiller?
Do Trane have any guidelines or manuals on working on the chiller?
Just out of interest, where abouts are you?
Jon :)
timothy
06-02-2011, 09:12 PM
jon,
Trane has a service guide which I have it talks about the lifting brackets but doesn't give a diagram or dementions on how to build them
Tim in K.C.
alan wolf
14-03-2011, 12:55 PM
Hello Timothy
Is the PCV with the motor thru the chiller?
Believe it was nicknamed 'sidewinder'
I have pulled the motors with slings only but that was back in the eighties.
Regards
AWW
CV_Geardrive
18-03-2011, 12:49 PM
Hi Timothy,
Check your email.
Regards,
CV
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.