Mitsubishi SRC63ZE-S1

[seacold]

Hi Guys could you tell me if I can turn a SRC63ZE S1 single split in to a multi split by making up a 3 way suction and discharge manifold a keeping the discharge piping at 1/4 and reducing the suction from 5/8 to 3/8 and connecting up 3 x 2.5 Kw cassettes using the standard interface SC-BIKN-E and the RC-E4 controller

[Andy AC]

Probably not, the control pcb's on the cassettes will be different to the original srk63 wall mount board. Most likely end up confused and not communicating properly if it does anything at all.

Andy