View Full Version : mitsi heavy query
kerrcell
24-01-2011, 06:08 PM
I have a client that has a mitsi heavy model FDEN406HES1 ( indoor ) celing type.Is is possible to alter indoor fitting to perimiter type ?
stufus
24-01-2011, 06:55 PM
I may be way off the mark here but...
I think the FDEN is the under-ceiling range ,And the FDUV or FDUM is the ducted range.
If what you mean by perimeter is linear grilles then you'll need to source the equivalent FDUV or FDUM to suit your condenser.
But yes it can be done.
http://eng.ivik.ua/equipment/mhi/fduva/
Have a look there ,it may help
Cheers
Stu
kerrcell
25-01-2011, 02:27 PM
Hi stufus,
I thought can manage to change installation position of indoor somehow,to use same wall type instead of ceiling.Opened up today but found that condensate tray is not changeable.Never mind thnaks just the same.
stufus
25-01-2011, 07:44 PM
;)Well I did say I may be way off the mark !!!
Cheers
Stu
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.