AndyHX
22-01-2011, 05:00 AM
Hey guys, i have scavenged some parts from a RY125luy1 outdoor unit. i would like to use the eev from the unit , if i supply power to the outdoor pcb and set dip switches to emergency heat , when i turn unit on the valve will wind down .. click click click etc...
What i want to do is take these parts and put them on to another system that currently has a txv , so what sensors does this valve need inputs from ? i know discharge is used for part of SH reading and there is one sensor after eev and distributor. will this work , is it worth a try, ?? this is for curiosity sake mostly.
cheers andy
What i want to do is take these parts and put them on to another system that currently has a txv , so what sensors does this valve need inputs from ? i know discharge is used for part of SH reading and there is one sensor after eev and distributor. will this work , is it worth a try, ?? this is for curiosity sake mostly.
cheers andy