Boof
05-01-2011, 06:31 AM
Hi all.
After getting the harvesting problem fix, and was going great for months, its now started another fault.
What happens this time, rest the unit, both green lights come on, the fan starts, the water starts to flow, than after about 10-20 seconds, a click is heard inside, the fan stops, but the water still flows, then a little time later, water stops. You can reset the machine, then starts again, can remove the white cover, machine knows this as it brings up the full led, close the lid, green led flashes then starts, but again stops after the time, so switch appears to be ok, but have noticed the water temp is cool, but not cold, but that could be due to the short time is running for.
Any ideas, do have some gaurges, but have never used them, so may need some assistance on the use of them.
Rob
After getting the harvesting problem fix, and was going great for months, its now started another fault.
What happens this time, rest the unit, both green lights come on, the fan starts, the water starts to flow, than after about 10-20 seconds, a click is heard inside, the fan stops, but the water still flows, then a little time later, water stops. You can reset the machine, then starts again, can remove the white cover, machine knows this as it brings up the full led, close the lid, green led flashes then starts, but again stops after the time, so switch appears to be ok, but have noticed the water temp is cool, but not cold, but that could be due to the short time is running for.
Any ideas, do have some gaurges, but have never used them, so may need some assistance on the use of them.
Rob