Aestrad
19-12-2010, 08:59 AM
Hello friends, I'm new here and my English is not very good, the problem I have is as follows, in a chiller York YK I have problems with the SSS, I first showed high temperature heat sink phase "A" after that phase SCR were damaged, check the cooling system was ok, was replaced damaged parts and work a day after the phase "B" is equal damage then replaced the three phases but still sends the alarm high temperature heat sink different stages were replaced insulation, and apply a film of thermal compound to the SCRs, the engine was made a test Meggin, will check the temperature sensors, pump heat sinks, voltage and all is well, temperatures have are of 213 degrees F with the temperature off the chiller, and I hope I can help with this problem.
Thanks ...
Thanks ...