View Full Version : capillary sizing
Narendrak
16-12-2010, 05:52 AM
Hi friends,
I've a 1.5 TR system supposed to work on capillary. The dia of the capillery is 0.080 inches.
The evaporating temperature is 20F and condensing temperature is 130F.
Please guide me in the capillery selection.
Thanks
Brian_UK
16-12-2010, 03:01 PM
Try DanCap from Danfoss
http://www.danfoss.com/BusinessAreas/RefrigerationAndAirConditioning/DanfossCompressors/Selection_Software.htm
tonyelian
16-12-2010, 06:57 PM
hi
if u have 0.080 inches ur length is 1.57 meter
Steve Wright
30-12-2010, 06:23 PM
BULLET, WATSCO, Supco.com and others cap manufactures have a cap tube sizing sheet.
Steve
Steve Wright
30-12-2010, 06:27 PM
www.supco.com/images/20%20cap%20tubing.pdf
This is it
Steve
lawrence1
30-12-2010, 10:17 PM
Narendrak,what is the refrigerant?
venkatesan
15-01-2011, 01:24 PM
why we are using R404-A instead of R-22 in negative temp other than non -cfc
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.