PDA

View Full Version : self install splits not cooling



rbartlett
03-08-2005, 05:57 PM
Went to a site today to help finish an installation. The customer asked while I was on site to look at a couple of splits which they had installed themselves three years ago but they never seemed to cool.

the guy said he thinks he didn't connect the areoquip connector correctly and all the gas went out..

they had a company under contract which wanted to charge 800 quid to fix them.

can you see why they wern't cooling??

cheers


richard

Peter_1
03-08-2005, 07:13 PM
They forgot in the factory to drill the holes in the threated connection perhaps?

rbartlett
03-08-2005, 07:54 PM
actually this is a protective block that come with the hoses

the guy didn't realise that they were suposed to come off before he connected them

cheers

richard

botrous
04-08-2005, 12:02 AM
here an old phrase says , give your bread to the baker to bake it even if he eats the half.
That's what they shoulded understand before installing the units

frank
04-08-2005, 08:32 PM
here an old phrase says , give your bread to the baker to bake it even if he eats the half.

Hi Botrous

Thats a new one on me :) Never heard it before.

botrous
04-08-2005, 09:36 PM
Your smiles indicates you liked it Frank . . . keep it in mind , it's old but useful