S87 stal screw

[RANGER1]

Can someone please assist in supplying shaft seal area dimention for S87 Stal
Shaft seal area damaged & require correct measurement to repair seal area .

Thanks

[josef]

Single or double?

[RANGER1]

josef,
Could only describe it as standard single seal .

Machine is 7 yrs old & seal area approx 80mm

What is double seal all about , is it something new?

[Grizzly]

Hi Ranger.
Sadly I only have the normal parts list which I assume you already have.
That only has the minimum of information.
Anyway good luck.
Grizzly.

[Gingerair]

I think Josef may be refering to a modification made to the shaft seal which included an extra sealing ring to prevent oil from draining out of the shaft seal during idle periods.

Ginge :)

[RANGER1]

Gingerair,
Yes that was 1 upgrade also I think that the bellows that slides onto the shaft has 2 "0" rings now insead of 1 for higher pressure refrigerants.

[Gingerair]

Hi Ranger
Sounds like you've got sorted, but if not i may know someone that may be able to help you out with a new seal.
Ginge :)

[nrian larson]

Please contact johnson controls denmark an ask for the repshop/tonny jørgensen