PDA

View Full Version : Thermo King and Carrier circuit diagram for



ruzgar78
28-11-2010, 10:08 AM
Thermo King and Carrier circuit diagram for

Luisillo
06-12-2010, 05:43 PM
hy ruzgar78, could you send me my mail the diagram wiring you have in the forum, thanks in advance.

Luisillo
06-12-2010, 05:44 PM
my mail luisfelipevac@hotmail.com

ruzgar78
08-12-2010, 10:44 PM
i send for you

yashavanth
05-01-2011, 12:18 PM
hi fnd plz tell me i have carrier supra 850 unit microprocessor power suppy is not showing in display board , i ll check battery very thing ok fuses also k , any body knw about plz tell me trouble shooting steps & send me wiring diagram

abbsnowman
05-01-2011, 01:47 PM
There is an on/off switch up on the rear of the micro box. Also make sure that the battery cables have 2 posative wires attached. One large cable and one 14g power for micro.

abbsnowman
05-01-2011, 01:55 PM
Ruzgar, although I think it's pretty cool that you have come up with an alternative for oem wiring, I have to say that I do not agree with you posting "wiring for TK and Carrier." This is very misleading for our members that are just learning. They are better served with learning the equiptment they are going to be working on.
Make no mistake members, there is no wiring diagram common to the two manufacturers.
YOU WILL NEVER SEE UNITS WIRED THIS WAY!!!
Maybe you could make it more clear in your posts that you are offering only an alternative to OEM?

ruzgar78
11-01-2011, 09:10 PM
THERMO KING AND OF COURSE SOME Connecting DIFFERENCES EXIST BETWEEN THE CARRIER.
EXAMPLE: OIL SENSOR THERMOKING N.C
CARRIER OIL SENSOR N.O
MACHINE MODEL AND SOFTWARE REQUIRED DÜZENLİYORUM.Türkiye After telling me the brand of the model also wore a lot of trouble and was trying to say was that error code also does not screen went disappears.
I'm an electrical engineer to help the friends who are always the problem.

The latest to do and running the card carrier.
Zanotti suitable models. ultimately the same logic, throw myself off from friends and sometimes the original cables to pull the new installation is easier when you use it s normally open and normally closed relay relays feature.

A friend working in Germany before Christmas taktım.Dizel fleet can be attached to all the machines can do the software changes are in line with demand software asm code I write using a micro-processor control card, that's all I'm driving through the relays.

cadwaladr
12-01-2011, 12:20 AM
did he say its on the right? wheres my mate jack!!!!!!!!!!

qasim2906
22-02-2011, 11:50 AM
hi ruzgar can u send me this diagram
cool_decent2010@yahoo.com

Perigault
23-02-2011, 06:51 PM
I'm looking for wiring diagram of sl 100 sl 200 e and the new SLX thermo king thanks David

mouse
24-02-2011, 06:06 PM
transilvaniamouse@yahoo.com

Thank you ruzgar78