View Full Version : Alarma -35 SBII SR
Jesusin
27-11-2010, 01:34 AM
Hi, I have colleagues sr sbIII failure code is -35 and not to erase, delete this assembly as the failure or if you give me access to some manual TK, I have manual air conditioning and Hispacold Spheros ...
Someone help me clear this alarm ...
gravy258
27-11-2010, 05:20 AM
-35 is run relay circuit. the dash denotes it was generated on a pretrip.
Press ALARM then press CLEAR.
If it doesn't clear press TK and CLEAR at the same time, get into next screen then press ALARM and press CLEAR.
abbsnowman
27-11-2010, 09:36 PM
That code can be nasty do trouble shoot. Very common with the new units with old style or aftermarket alternators installed. Allot of time this code will only show on a long or non running pre-trip.
this code will also show if the battery is low,run the unit normally for 30 mins then try another pretrip
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.