Alarma -35 SBII SR

[Jesusin]

Hi, I have colleagues sr sbIII failure code is -35 and not to erase, delete this assembly as the failure or if you give me access to some manual TK, I have manual air conditioning and Hispacold Spheros ...

Someone help me clear this alarm ...

[gravy258]

-35 is run relay circuit. the dash denotes it was generated on a pretrip.
Press ALARM then press CLEAR.

If it doesn't clear press TK and CLEAR at the same time, get into next screen then press ALARM and press CLEAR.

[abbsnowman]

That code can be nasty do trouble shoot. Very common with the new units with old style or aftermarket alternators installed. Allot of time this code will only show on a long or non running pre-trip.

[MRW]

this code will also show if the battery is low,run the unit normally for 30 mins then try another pretrip