PDA

View Full Version : Whirlpool ISPRAC Control Panel



chara
22-11-2010, 11:42 PM
Hello folks,

I have an ISPRAC control panel 08232484R1 that is faulty. Does anyone know where I can get one cheap or does anyone know a common fault on the board?

It belongs to a whirlpool fridge freezer model No. ARC 7610.

Any help on this would be much appreciated.

Kind Regards

A Chara

spimps
23-11-2010, 08:15 AM
What is the fault ?
also there is a 12 digit number on the model plate which defines the different versions of the 7610.
BG

chara
23-11-2010, 02:14 PM
Hi,

Sometimes the fridge works and sometimes it dosent. If I twist the thermostat down and back up it works for a while. The sticker with the model number inside the fridge has been taken off. There is a sticker on the back with the following numbers:
90361921000
0033175

The fridge is 2 meters high by 600 wide with freezer on the bottom.

spimps
24-11-2010, 07:28 AM
You would need to check the fridge and freezer sensors with a meter before changing the board.
Any frost build up in freezer ? (frost free,but could be fault).
If there is any sign of frost then switch off for 24 hours, both fridge and freezer.

spimps
24-11-2010, 07:34 AM
Double post !