View Full Version : Transport engneers
paulc81
20-11-2010, 01:12 PM
I have a 40 ft container with a mishibishi mmcc 111a-25b controller on it the set tempeture is 2 oc.it starts a 4oc fine then just overshoots 2 0c and runs around 0 oc. any idears spoke to couple transport guys they say these controllers are a nightmare just change to a elliwell controller but rather try sort this one out. Paul
I have a 40 ft container with a mishibishi mmcc 111a-25b controller on it the set tempeture is 2 oc.it starts a 4oc fine then just overshoots 2 0c and runs around 0 oc. any idears spoke to couple transport guys they say these controllers are a nightmare just change to a elliwell controller but rather try sort this one out. Paul
Hi Paul,
I personally have no experience with this controller, but you may be better off posting in the transport section where someone may be able to help?
regards,
djbe.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.