PDA

View Full Version : Refrigerant R22/R404A



Carlo Hansen
18-07-2005, 03:38 PM
Hi to all

We normaly use Maneurop compressors, on this compressor
we can change the oil and let them run on R404A instead of
R22.
Does anyone know if this is possible with. Lùnite compressors.
The compressor is a Lùnite CAJ 9513 / R22

Best regards
Carlo Hansen

Peter_1
18-07-2005, 05:53 PM
We have done it anyway but removing the oil of a UH is not that easy. Be carefull when turning upside down that compressor doesn't comes out of his inner suspension springs.

We even have applications where a R134a is running on R404a and vice versa but this was for special reasons.

Temprite
19-07-2005, 11:56 AM
Hi to all

We normaly use Maneurop compressors, on this compressor
we can change the oil and let them run on R404A instead of
R22.
Does anyone know if this is possible with. Lùnite compressors.
The compressor is a Lùnite CAJ 9513 / R22

Best regards
Carlo Hansen

Hello Carlo.

I once ordered a hermitique condensing unit on R22.The supplier told me that they were temporarily out of stock, But they had the equivelant unit on r 404a.

He then informed me that they were the same unit except one had mineral oil and the other synthetic.

Purchased the r404a unit and ran it on r22.No problems.

BESC5240
19-07-2005, 12:23 PM
We normaly use Maneurop compressors, on this compressor
we can change the oil and let them run on R404A instead of
R22.


Dear Carlo,
Just to inform you: you should not do this on a regular basis.
Maneurop states that "..Lifetime reduction shall be expected.." (what ever it means) when using R404A in a R22 compressor (with ester oil).
There are some (minor) differences between the MTZ (for R404A) and MT (for R22) compressors like : other piston rings, stainless steel valves, ...

Carlo Hansen
19-07-2005, 03:44 PM
Hi again

Thanks for the info. A have changed the oil and now a will see
how long the system will be running.

Best regards
Carlo Hansen