PDA

View Full Version : Mypro CP III communication


VEYSEL DURLU
20-10-2010, 04:48 PM
Has anyone ever succeded installing communication between Mycom Mypro CPIII and a PLC.

So far we could not succeded it.
avico
21-10-2010, 03:59 PM
What's your proplem ?
tom_80
21-10-2010, 09:04 PM
you can`t connect the CPIII with a BUS to some other PLC... you just have a few output contact where give you some reference about the running condition
HAROLDMYCOM
24-12-2010, 12:00 AM
Hi, sorry the MYPRO 3 panel only has a RS485 communication.

So any modbus or profibus is not possible with this CP3, if needed you can always upgrade to a PLC S7 but the cost is quite high.