PDA

View Full Version : Dixell XR164c controller



Grizzly
13-10-2010, 07:12 PM
Hi Guys.
Can anyone assist, I have trawled all the usual sites looking for details of the XR164c controller.
I can find references to the various ones from the 160 series but not the actual 164!
I am looking for set-up details.
Thanks Grizzly

bill1983
13-10-2010, 08:06 PM
what differences are there that you know of between the 160 and 164? some of the dixell ranges only had subtle differences which you could usually work out on site with the general range book?
i'll check my old paperwork anyway to see what i have

bill1983
13-10-2010, 08:38 PM
nothng in my files sorry. try thermofrost cryo they are dixell agent and used to be pretty good on old controllers. nothing on their website though. you'll have to get their phone number.
good luck.
what problems are you having?

Grizzly
13-10-2010, 09:18 PM
Nothing specific yet Bill (A new site!)
I just wanted to compare settings.
I have the generic settings, I was just wondering.
What setting differences, if any there were?
Grizzly

lowcool
14-10-2010, 03:04 AM
these two mobs reckon they sell them the controller is in the advanced range.bottom url didnt work

www.best4spares.co.uk/sitemap.asp (http://www.best4spares.co.uk/sitemap.asp)
www.ryanairconspares.com/.../Refrigeration_Parts_Price_List.pdf-UnitedKingdom (http://www.ryanairconspares.com/.../Refrigeration_Parts_Price_List.pdf-UnitedKingdom)

Len Fiddler
14-10-2010, 10:05 AM
Hi Grizzly Give me a call and I will try to help you
020 8655 7600
Len

chemi-cool
14-10-2010, 11:21 AM
Spoke to the local Dixell agent, he is looking for it and will email it to me if they can get it.

Len Fiddler
14-10-2010, 11:40 AM
Hi Chemi-Cool
We are UK Dixell agents and I have the parameters for the XR164C
Regards
Len

chemi-cool
14-10-2010, 11:46 AM
Thanks Len.
Left you a massage.

Grizzly
14-10-2010, 06:33 PM
Hi Chemi-Cool
We are UK Dixell agents and I have the parameters for the XR164C
Regards
Len

Thanks for the offer Len.
I have benefited from your help and advise in the past.
Yours is a name well known to us Ammonia Engineers!
I too will leave a message for you.
Chemi.
Thanks for the kind offer of assistance any help is appreciated!
I also have 1 of the other lads helping (off forum)
So hopefully I will end up with the necessary info!

Lowcool thanks for the post.
I know where to purchase them from (Ref. Len Fiddler * A legend*).
Yours & Bill's assistance is appreciated.
Thanks Guys.
Grizzly.

Grizzly
15-10-2010, 07:33 PM
No further assistance needed Guys.
Len the Legend, came up trumps!
Thanks for all the offers of help on and off the forum.
Grizzly