Start Capacitor Avalible

[crazyman]

Hi guys,
My mate has a compressor (Daewoo HSL27YE-5) which he is using to run a freezer. He only has a i10Honda inverter generater which will only start it if it is a full revs but cant start it at eco idle down. Is there a starting capacitor he could wire in to help during start up loads. If I remember correctly he said he measured the startup amps to be 11, but he can start another compressor that draws 8amps.
From what I've read sofar there should be a capacitor avalible for it. Or am I wrong?
Thanks

[Brian_UK]

Found some wiring diagrams for that compressor but no details given for the capacitor sizes,... we'll keep looking.

COMPRESSOR (http://www.google.co.uk/url?sa=t&source=web&cd=2&ved=0CBkQFjAB&url=http%3A%2F%2Fholod-konsultant.ru%2Fyabbfiles%2FAttachments%2Fcatalogue.pdf&rct=j&q=Daewoo%20HSL27YE-5&ei=biWuTOzHFszS4wb2ptWmBg&usg=AFQjCNHlmxWFQ0o0hcosp-6-GHA5POjXdg&sig2=po0Hr6m5IVE3eDwIMIOUEA&cad=rja)

Found a fridge service manual which show a 290v / 50 mF capacitor being used.

Service Manual (http://www.google.co.uk/url?sa=t&source=web&cd=3&ved=0CB4QFjAC&url=http%3A%2F%2Fwww.shema.ru%2F0_s%2Fref1%2FDaewoo%2FFR_490M_490P.pdf&rct=j&q=Daewoo%20HSL27YE-5&ei=biWuTOzHFszS4wb2ptWmBg&usg=AFQjCNHgYwJtUytxFsVkkUw72MfILKej0A&sig2=s_KVHDEGVMySymDiJyluBg&cad=rja)

[mikeref]

Hi guys,
My mate has a compressor (Daewoo HSL27YE-5) which he is using to run a freezer. He only has a i10Honda inverter generater which will only start it if it is a full revs but cant start it at eco idle down. Is there a starting capacitor he could wire in to help during start up loads. If I remember correctly he said he measured the startup amps to be 11, but he can start another compressor that draws 8amps.
From what I've read sofar there should be a capacitor avalible for it. Or am I wrong?
Thanks
Hi there, a 27YE-5 is a 1/3 HP compressor, same capacity as a Danfoss FR11A. The EU10-I generator is an excellent power source( use it all the time for work) but it is rated at 850watts or 3.7amps/230volts and i would not go pushing its limits. You would be far better off using the EU20-I, that has double capacity.. mike.

[crazyman]

Thanks for your replys.
Mike, Shouldnt the starting capacitor hold/deliver the required amps during startup? Then the eu10 can idle down and run it easily.