View Full Version : tempertaure & humidity control
hydronicsys
03-10-2010, 02:02 PM
Hello!
Do any body guide us to design temperature and humidity control unit for calibration workshop. Room size is 8x4x2.4
Room temp is 32C
Condition require 21C and 50%RH
NoNickName
03-10-2010, 10:16 PM
Close control unit for metrological applications.
carlfoster
22-05-2011, 10:18 PM
Hello!
Do any body guide us to design temperature and humidity control unit for calibration workshop. Room size is 8x4x2.4
Room temp is 32C
Condition require 21C and 50%RH
There is a close control unit made by Compact within the UK. Here is the website http://www.compactaircon.co.uk/
elfriedamiller
08-07-2011, 01:35 PM
Last month my friend made a humidity control system that was dehumidifier to reduce humidity. This was not so simple to make the humidity control system. A dehumidifier manufacturer helps him to make such a large system. He took two months to complete it. You can consult to that manufacturer. Hope this information will help you.
____________________
For More Information Visit: Dehumidifier Reviews (http://www.dehumidifierreview.net/) and Dehumidifier Ratings (http://www.dehumidifierreview.net/)
Denco Technical
28-07-2011, 02:00 PM
You need to be very careful selecting a unit as there will be little or no heat gain and a unit can easly over run.
We make a unit for this application, its the lab unit, for more info contact you local GEA office.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.