paulc81
16-09-2010, 08:53 PM
hi all.
I have installed a bock f3 compressor on a fishing boat engine with 24v clutch.(I have installed lots f2 compressors with same clutch all working correctly)after couple days the clutch burns out melting and destroying the hub to.the clutch is a 6in clutch.I think the clutch is not big enough to drive the compressor and is slipping and burning out,but the supplyer says its big enough.
The system is running on r404a and is running at 1bar suction about 13 bar condensing.static evaperators 30m of 3/4 pipe.can anyone help. Paul
I have installed a bock f3 compressor on a fishing boat engine with 24v clutch.(I have installed lots f2 compressors with same clutch all working correctly)after couple days the clutch burns out melting and destroying the hub to.the clutch is a 6in clutch.I think the clutch is not big enough to drive the compressor and is slipping and burning out,but the supplyer says its big enough.
The system is running on r404a and is running at 1bar suction about 13 bar condensing.static evaperators 30m of 3/4 pipe.can anyone help. Paul