SL 200e engine dont start

[climas]

Unit be shut off one mounth and after that code 10 persist, clear code nothing again HPCO switch is good so does anybody have idea maybe what is problem

[Latte]

Has someone fitted a LP switch in the circuit somewherw and wired it in on the hp circuit

[cadwaladr]

Unit be shut off one mounth and after that code 10 persist, clear code nothing again HPCO switch is good so does anybody have idea maybe what is problem
check carefully i am sure this unit has 2x hpco,s one for electic one for engine?

[bellg]

I have seen this happen a few timesm especially after fridge has been idle for a while.
Make sure the diesel has not run back.
Bleed system thoroughly and also make sure the fuel pump solenoid is working properly.

[s4ndy]

is unit switched to electric the overload at contactor can also cause code 10

[DaButcher]

Assuming you get the code 10 before the starter cranks..........battery voltage is low

[climas]

Thanks all,stuppid driver cost me two days and night but realy I this unit dont know very good that is problem