jcastillo401
28-08-2010, 12:11 AM
hello, here is the deal
I fixed a leak on evaporator the unit is split system heat pump, come from factory pre-charge with 290 oz (18.2 lb) of r-22 this charge is good for 25 ft, but the unit installation is about 60 ft apart (air handler-compressor), the pipe size is 3/4 low 3/8 high, how can I calculate how much more refrigerant is needed to complete the charge.
thanks
I fixed a leak on evaporator the unit is split system heat pump, come from factory pre-charge with 290 oz (18.2 lb) of r-22 this charge is good for 25 ft, but the unit installation is about 60 ft apart (air handler-compressor), the pipe size is 3/4 low 3/8 high, how can I calculate how much more refrigerant is needed to complete the charge.
thanks